Viltrox JY-710 Camera Wireless Timer Remote Shutter Release Control Cable for Nikon Pentax Pan

Availability: In stock
SKU: 1374615
Free shipping
  • *
$73 AUD
decrease increase

Delay / Self Timer (DELAY) 
Just like the self timer on your camera. The timer remote switch allows you to set any delay (in 1 second increments) up to 99 hours, 99 minutes and 99 seconds.
Interval Timer (INTVL)
The Interval Timer can be set to any time period up to 100 hours as well. If you set it to 10 minutes, for example, one exposure will be taken every 10 minutes until either the film runs out or the Exposure Count limit has been reached.
BULB/Long Exposure (LONG)
It allows you to take time exposures up to 100 hours long.
Exposure Count (N)
This setting allows you to set the times of exposures that will be taken, up to a total 399 times. For example, if you set it to 30 times, then the exposure will be only taken 30 times.

Timer delay: 0s to 99hrs 59min 59s in one-second increments
Exposure time: 0s to 99hrs 59min 59s in one-second increments
Interval: 1s to 99hrs 59min 59s in one-second increments
Number of shots: 1 to 399,-- (unlimited)
Power source: Transmitter: 1000H (use 2*AAA Batteries)( Not included )
                        Receiver: 400H (use 2*AAA Batteries)( Not included )
Battery life: JY-710TX can work for about 20,000 times;
                   JY-710RX can standby time for about 45 hours.
Operating temperature: -20 -- +50 degree 
Dimensions: JY-710TX:155X40X18mm
Weight: Approximately 105g (3.7oz), excluding ferrite core
Distance: ≤100m
Channels: 16

Compatible With Camera Models:

C3 Cable Compatible With :
For Canon EOS 10D, 20D, 30D, 40D, 50D, 5D, 5D Mark II, 5D Mark III, 5DS,5DS R,6D, 7D, 7D Mark II, 1D, 1Ds,1D Mark II, 1Ds Mark II,1D Mark II N, 1D Mark III,1Ds Mark III,1D Mark IV,1D X and 1D C
C1 Cable Compatible With :
For Canon :PowershotG10,G11,G15,G12, G16, G1X,G1XII, SX50 HS, SX60 HS 
For Pentax:K-5,K-5IIs, K-7,K-30, K-50, K10D,K20D,K100D,K200D, 
For Samsung:GX-1L,GX-1S,GX-10,GX20,NX100,NX11,NX10,NX5 
For Contax:645,N1,NX,N DigitalHassleblad: H series
N1 Cable Compatible With :
For Nikon:D850,D800series,D810series,D700,D200,D300series,D2series,D1series,D4,N90s,F5,F6,F100,F90,F90X,D3s 
For Fujifilm:S5Pro,S3Pro 
For Kodak:DCS-14n
N3 Cable Compatible With :
For Nikon: DSLR D7200, D7100, D7000, D5500, D5300, D5200, D5100, D5000, D3300, D3200, D3100,D750, D610, D600, D90, Df
Package Included:

1 x Timer Remote
1 x Receiver 
1 x Shutter Release Cable (C1/C3/N1/N3)
1 x English Instruction Manual 

Delivery FeeFREE
Delivery Timeframes10 - 25 Days
Dispatch OriginChina
WarrantyUp to 12 months
Write your own review
  • Bad
  • Excellent